5
⚠
ATTENTION: Any person who performs the interventions on the product must first read and fully understand the
contents of this manual and be fully familiar with the control panel of the product.
⚠
ATTENTION: The product may be used, changed and programmed only by adults. In accurate or random settings
may lead to dangerous situations or malfunctions.
⚠
ATTENTION: The company Alfa Plam bears no civil or criminal liability for damages in the event the product is
subjected to unauthorised repairs or replacement of parts.
⚠
ATTENTION: While the product is in operation, some of its surfaces may reach extremely high temperatures.
Therefore, the user is advised to take all the necessary precautions, especially when children or elderly or disabled
people are present.
⚠
ATTENTION: Do not cover or close the hot air outlet in any way. Do not cover the product with any cloth or any similar
material.
⚠
ATTENTION: To avoid accidental tipping over of the furnace, never lean or place too much weight on the open door
while the cleaning procedure is in progress.
It is recommended to avoid this kind of pressure and take the necessary precautions, especially when children or
elderly or disabled people are present.
General recommendations
⚠
ATTENTION: Never use the product for purposes other than those for which it is designed and manufactured.
⚠
ATTENTION: The product must not be used for cooking.
⚠
ATTENTION: The product should not be used in the event of any failure or malfunction. In such a situation,
disconnect the power cord from the socket immediately.
NEVER leave the product door open while the furnace is operating.
Pipes have to be regularly inspected.
NEVER use steam for cleaning of the product.
Always consult qualified and authorised personnel for any service interventions that may be necessary. Use only the
original spare parts.
Fuel in the burner can be fed only through an automated feeding system and not directly by the user.
⚠
ATTENTION: In the case of "failed ignition“, you must remove all the pellets deposited in the combustion chamber
before you try to re-ignite the furnace. The pellet removed from the furnace must not be returned to the tank.
This manual must be considered an integral part of the product and must be used over its entire service life. It has to
be kept at a safe location. In case the manual is lost or damaged, a replacement copy can be obtained from your dealer.
Safety device
The product is equipped with the following safety devices:
•
Thermostat for determining the temperature of the tank: This device shuts down operation of the product each
time the set safety limit is exceeded;
•
Meter for determining the temperature of smoke: this element establishes the temperature of smoke and
continually monitors the proper functioning of the product;
•
Pressure switch:this element assesses whether the pipe is clogged;
•
Thermometer for the environment: this element constantly monitors the temperature of the room where the
furnace is located;
•
Modulation mode of operation: if the flue gas temperature exceeds the set safety threshold, the device will
automatically reduce the amount of pellets for burning until the temperature drops below the pre-set limit.
Incorrect parameter settings can lead to exceeding the safety limits and can lead to excessive consumption of pellets.
The exceeding the safety limits can also be caused by poor ventilation of the environment in which the furnace is located
which presents the device to get enough cold air
IT IS FORBIDDEN TO shut down the safety devices. When you eliminate the cause of the security system activation,
the device can be restarted in order to restore its proper functioning.
⚠
ATTENTION: The device must be installed in such a way that the electrical cable can be easily reached.
Note: The security section is made taking into account the normal conditions of use of the product described and
specified in the chapter 3. The company Alfa Plam bears no responsibility for any personal injury or property damage that
may occur if the furnace is not used in accordance with the conditions specified in this user manual. The company Alfa
Plam also bears no responsibility for any personal injury or property damage that may occur if the user fails to comply with
the following regulations:
A)
They must take all the necessary measures and precautions to ensure that no party activates equipment until
the repairs, adjustments, replacement, or maintenance operations are completed;
B)
Do not remove or change any safety devices on the device;
C)
The device must be connected to the system for extracting of smoke which is functioning correctly;
D)
Make sure that the environment in which the furnace is installed is sufficiently ventilated, as prescribed in this
manual.
Environment for the use of the product
⚠
ATTENTION: The device must be installed in an environment with ventilation, whereas in accordance with the current
regulations it must be provided with sufficient combustion air. This is important to ensure its proper functioning.
