17
17
Adjust the volume of phone calls to a level
that is comfortable and safe while the car is
in motion. To adjust the default volume of
Blue&Me™
Nav
, see paragraph
“EXTERNAL AUDIO VOL function” in the
sound system owner handbook. To tem-
porarily adjust the volume of the current
phone call, press
+
or
–
or adjust the posi-
tion of the radio knob. After the phone call
is disconnected, the volume will revert back
to the original level.
You can press
+
or
–
also to adjust the vol-
ume of the current
Blue&Me™ Nav
voice
announcement.
Please remember that to interrupt a voice
announcement, you can always press
ô
at
any time during a voice interaction and give
a new voice command.
NOTES
❒
Instructions concerning voice commands
are identified in the text by symbol
}
.
❒
After you press
ô
, if you do not issue a
voice command within a few seconds, the
system will prompt you to pronounce a
voice command. If you do not respond,
then voice recognition shuts off. It is the
same case with not responding to a ques-
tion during a voice interaction. You will
hear a tone indicating when voice recog-
nition is deactivated.
❒
When the system fails to recognize your
voice command, it will give you another
opportunity to re-pronounce the voice
command. If you are unsure of whether
the voice command is appropriate for the
given context, pronounce “
Help
”.
Using voice recognition
The voice recognition system may occa-
sionally misrecognize a voice command. To
ensure that your voice commands are al-
ways recognized by the system, use the fol-
lowing guidelines:
❒
After pressing
ô
, pronounce the voice
command after the system plays a tone
indicating that voice recognition is active.
❒
After the system asks a question, wait for
one second before pronouncing the re-
sponse to ensure that voice recognition
is active.
❒
If you want to pronounce a command
without waiting that the system has fin-
ished its announcement or question, you
can press again shortly
ô
to interrupt
what the system is saying and pronounce
your command.
