94
94
Problem
Probable Cause
Possible Solution
Displayed message:
NO PLAYLISTS FOUND
Or
Blue&Me™ Nav
says:
“
No playlist found
”
Displayed message:
INVALID PLAYLIST
Displayed message:
EMPTY PLAYLIST
Or
Blue&Me™ Nav
says:
“
Empty playlist.
”
Displayed message:
BAD MEDIA
Indication on sound system display:
MEDIAPLAYER
in absence
of USB device connected to the
car USB port
Build a playlist on your computer using your media
file software and then copy it to your USB device
❒
Make sure the playlist is in
.m3u or .wpl
format.
❒
Build the playlist again following the instructions
given in section PLAYLISTS FOR
Blue&Me™
Nav
- PRACTICAL HINTS.
❒
If the problem persists, delete the playlist from
your USB device.
❒
Delete the playlist from your
USB device or copy media files to the playlist
using your media file software.
❒
Reduce the number of tracks
in the playlist, using your media file software.
Delete bad media from your USB device
❒
To change the current audio source, press button
SRC
or the dedicated buttons
FM
,
AM
,
CD
on the sound system front panel.
❒
In the electronic key inserted in the start-up
device condition, insert and then remove the USB
device from the USB port of the vehicle.
❒
To avoid the visualization of the
MEDIAPLAYER
indication, in absence of the USB device, it is
suggested to extract the device always in the
electronic key inserted in the start-up device
condition, or interrupt the reproduction (with vocal
command
STOP
) before removing the USB device
from the USB port on the vehicle.
No playlist is stored on the USB
device connected
Playlist is damaged or invalid
❒
No media file is contained
in the playlist
❒
The
.wpl file is too large for
Blue&Me™ Nav
memory capacity
❒
The playlist does not contain
references to media files on your USB
device
Digital audio file is damaged or invalid
The USB device has been removed from
the USB port on the vehicle in the
electronic key extracted from the
start-up device condition