50
50
On your mobile phone, query for de-
vices equipped with
Bluetooth
®
wireless technology that are within
range (this option on your mobile
phone might be called Discover, New
Device, etc.). View the list of
Blue-
tooth
®
wireless technology enabled
devices and select “
Blue&Me
”
(item that identifies the hands-free kit
in your car).
When prompted by the mobile phone,
enter the PIN number shown on the
instrument panel display using your
mobile phone keypad. If pairing is suc-
cessful, the system will say “
Con-
necting
” and then the display will
show the paired mobile phone ID.
It is of vital importance to wait until
this confirmation message is displayed
since pressing
ß
or
&
at this time
may cancel the pairing process. If pair-
ing fails, an error message will be dis-
played and the pairing procedure shall
be repeated.
At first pairing, the system will say
“
Welcome
” immediately after con-
necting. This message will no longer
be heard at next pairing procedures.
The system asks if you would like to
copy your paired phone phonebook.
It is recommended to copy it. To start
copying the phonebook, pronounce
“
Yes
”; otherwise say “
No
”.
For certain mobile phones the phone-
book is not copied automatically, in
this case you must send the contacts
in your mobile phone phonebook to
the hands-free phone system using
your mobile phone keypad. If the
hands-free phone system asks you to
do this, then perform this procedure
following the instructions specific to
your mobile phone and press
ß
when
you have finished.
Practical hints
To improve both the voice recognition of your
phonebook entries and
Blue&Me™ Nav
pronunciation accuracy when repeating the
entries, please try to enter contact entries
and memorize them using the following cri-
teria:
❒
Avoid abbreviations.
❒
Write foreign names according to the way
in which they are pronounced according
to the rules of the
Blue&Me™ Nav
language set on your car. For example,
enter “Tanja” as “Tanya”, to improve
recognition accuracy and also to obtain
the correct pronunciation by the system.
❒
When adding or editing contact entries,
insert the appropriate accent marks when
the name requires these marks to be
properly pronounced and recognized by
the system. For example enter “Nicolo
Rebora” as “Nicolò Rébora” to obtain the
correct pronunciation.
❒
When adding or editing contact entries,
bear in mind that certain isolated block
letter may be read as Roman numerals
(e.g.: V may be read as fifth).
❒
When calling contacts by voice, do not in-
clude the middle names or middle initials
of your contacts.
