56
56
Using the phone during the
updating procedure
During the updating procedure it is howev-
er possible to make or answer a call.
Blue&Me™ Nav
will pause the updating
procedure and resume it at the end of the
phone conversation automatically.
To make or answer a call during the updating
procedure using manual interaction, refer to
sections MAKING A PHONE CALL and IN-
COMING CALLS.
The updating procedure will be paused auto-
matically.
Ending the phone call will resume the up-
dating procedure automatically.
Resuming the update
If the updating procedure is paused using the
settings menu option, the updating procedure
shall be then resumed manually.
To resume the updating procedure using
manual interaction, proceed as follows:
❒
Your mobile phone shall be paired with
Blue&Me™ Nav
.
❒
Press
ß
and move to
SETTINGS
,
RE-
SUME UPDATE
(this menu option is
available only if update has been previ-
ously paused). Press
SRC
or
ß
.
❒
Blue&Me™ Nav
will display the mes-
sage
RESUME UPDATE
and say “
Up-
date. On completion, a message
will appear
”.
If the updating procedure was paused be-
cause the electronic key has been removed
from the ignition device, the updating proce-
dure will be resumed automatically.
Notes
❒
Updates will be resumed automatically
only if using the same mobile phone used
for starting the updating procedure.
❒
Blue&Me™ Nav
will pause automati-
cally the updating procedure if the paired
mobile phone is no longer available, or if
updating is paused by the Service Centre,
if communication is stopped (e.g.: tun-
nels), or if the system slows down too
much its working speed.
Blue&Me™
Nav
will try to resume updating at preset
time intervals. Should it be not possible to
resume updating while driving, updating
will be resumed at next engine starting.
If you encounter difficulties with any of the-
se operations, consult section HANDS-FREE
KIT - TROUBLESHOOT-ING.