Alfa Laval ALTB-SB-20, Инструкция по эксплуатации

Страница: 38 / 74

7 Parts list / Service kits
Ensure totally clean surfaces during mounting. Always use original Alfa Laval parts.
7.5 Installation Drawings
The mounting tool must be used for correct shaft adjustment and installation of ALTB-SB-20.
All position numbers are according to drawings and BOM’s 7.1, 7.2, 7.3, 7.4.
7.5.1 Shaft, Propeller and Bottom Console in tank:
∆
1: Marking line
∆
2: Cutting line
∆
3: Welding of shaft for gear motor onto agitator shaft
X1 = “Thickness of Gasket” + “Thickness of Top Plate”, if gasket is an O-ring then “Thickness of Gasket” = 0
7.5.2 Shaft, Propeller and Bottom Console in tank, Parts List:
Pos.
Qty Item No. Drawing No. Denomination
99 1 NA NA Tank mounting flange
(welding flange)
38