Alfa Laval ALTB-SB-20, Инструкция по эксплуатации

Страница: 8 / 74

3 Installation
The instruction manual is part of delivery. Study the instructions carefully.
The Agitator is for permanent fastening.
Make sure the motor corresponds to the environment.
Check the direction of rotation before operation.
3.2 Requirement for installation, personnel
Welder:
Experience from similar types of installation, covering TIG, MIG and MAG welding procedures in stainless steel thin
walled material.
Proven skills in reading installation guidelines and drawings ensuring that the installation is carried out safe for personnel
and property.
Erectors:
Experience from similar types of installation.
Proven skills in reading installation guidelines and drawings ensuring that the installation is carried out safe for personnel
and property.
Electrician:
Certified according to local regulations and experience from similar types of installation.
Proven skills in reading installation guidelines and drawings ensuring that the installation is carried out safe for personnel
and property.
3.3 Installation (with cutting/machining and welding required)
3.3.1 Requirement for installation
This work should be carried out by at least two persons and for safety reasons a platform or a scaffold should be
established around the tank top.
During installation ensure to use sufficient lightning.
The tank top must be horizontally during installation – if that is not the case, a laser must be used to ensure that the
right position for the “Bottom Console” can be found.
Ensure that the tank does not contain neither dangerous liquid nor gasses and that good ventilation is established.
Always have safety elements removed by authorized personnel.
Never cover or remove nameplates.
Always use lifting equipment when handling heavy parts of the Agitator.
Never connect to power during installation.
Always have the Agitator connected to power supply by authorized personnel.
Note: Alfa Laval highly recommends installing motor protection guard to the Agitator.
All position numbers and item numbers refer to the drawings show and specified in 7 Parts list / Service kits
8