Alfa Laval ALTB-SB-20, Инструкция по эксплуатации

Страница: 17 / 74

3 Installation
The instruction manual is part of delivery. Study the instructions carefully.
The Agitator is for permanent fastening.
Make sure the motor corresponds to the environment.
Check the direction of rotation before operation.
Step 9
3.4.6 See illustrations, 7.1, 7.2, and 7.5.3.
A. The shaft-end surface pos. 76 and the hollow shaft surface of the gear motor pos. 2 are cleaned and gently greased.
B. The gear motor pos. 2 is gently lowered onto the “Flange, Upper” pos. 5 using a hoist.
C. The screws pos. 15, washers pos. 16 and nuts pos. 20 are mounted using some Loctite
®
and tightened till 51 Nm.
17