ALDI ABP1815MA Скачать руководство пользователя страница 70

Страница: 70 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

[email protected]

CID180XA.9 • 2323 • 05/2019

MODEL No.:

CID180XA.9 • 2323 • 05/2019

12.FAQ/Troubleshooting

1. REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES

Charging time problems, as above, and having not used a battery

pack for a prolonged time will reduce the battery pack working time.

This can be corrected after several charge and discharge operations

by charging & working with your driver. Heavy working conditions

such as large screws into hard wood will use up the battery pack

energy faster than lighter working conditions. Do not re-charge

your battery pack below 0

C and above 40

C as this will affect

performance.

2. WHY DOES THE DRIVER NOT TURN ON WHEN I PRESS THE

TRIGGER SWITCH (2)?

The forward/reverse selector (1) is positioned in the lock function.

Unlock the forward/reverse selector (1) by putting it into the required

rotation position. Push the trigger switch (2) and the driver will start

to rotate.

3. WHAT IS THE FUNCTION OF THE FORWARD/REVERSE

SELECTOR (1)?

Forward/reverse selector (1) allows you to change the direction of the

motor while the trigger switch (2) is not depressed.

Driving uses the forward mode. The reverse mode is intended for the

removal of bolts, nuts and various threaded fasteners.

4. WHAT DO I DO IF I HAVE AN ISSUE WITH MY DRIVER?

If you have any issues with your driver, please contact our Customer

Service line on 1300 889 028.

Содержание ABP1815MA









































































































































































Результаты поиска

Содержание ABP1815MA

Отзывы:

Похожие инструкции для ABP1815MA

Бренды по названию

Популярные бренды

ALDI ABP1815MA, Инструкция по эксплуатации

Результаты поиска

Содержание ABP1815MA

Отзывы:

Похожие инструкции для ABP1815MA

Бренды по названию

Популярные бренды