27
27
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
CDT218XA.9 • 2323 • 05/2019
MODEL No.:
CDT218XA.9 • 2323 • 05/2019
For setting the torque position, first select a low setting on the torque
adjustment ring (2) and align the selected number with the triangular
indicator on the top of the drill / driver.
Slowly increase the torque setting to the desired level. It is suggested to
test the setting on scrap material first.
5. HOW DO I SELECT DRILL FUNCTION?
When using the drilling function the torque control has no effect to the
output of the drill. The drill function is used when using the drill to drill
holes in metal, non ferrous material, wood, plastic and similar materials.
Rotate the torque adjustment ring (2) so the symbol of the drill bit
aligns with the triangular indicator on the top of the drill / driver.
6. HOW DO I USE THE 2 GEARS ON THE DRILL?
To select LOW speed (mark is 1) (e.g. low speed, high torque setting),
push the gear selector forward, towards the chuck. The number “1” will
be displayed.
To select the HIGH speed (mark is 2) (e.g. high speed, low torque
setting), push the gear selector backwards. The number “2” will be
displayed.
NOTE:
The gears cannot be changed if the on off switch (10) is
depressed.
7. WHAT IS THE FUNCTION OF THE FORWARD/REVERSE SWITCH?
Forward/Reverse rotation control (4) allows you to change the direction
of the motor while the trigger switch (10) is not depressed.
Drill / driving uses the forward mode. The reverse mode is intended for
the removal of screws and assisting to remove jammed drill/driver bits.
8. WHAT DO I DO IF I HAVE AN ISSUE WITH MY DRILL?
If you have any issues with your drill / driver, please contact our
Customer Service line on 1300 889 028.
