16
16
AFTER SALES SUPPORT
1300 889 028 (toll free)
MODEL No.:
CID180XA.9 • 2323 • 05/2019
e-mail:
D
8. Operation
8.1 Trigger Switch (2) (See Fig. D)
Press in the trigger switch (2) to start the Impact Driver, and fully
release pressure off the trigger switch (2) to stop the Impact Driver.
The trigger switch (2) is fitted with a brake function which stops the
chuck / hex drive immediately when you quickly release the trigger
switch (2).
The trigger switch (2) also operates the variable speed by applying
various pressure to the trigger. Higher speed and torque results with
increased trigger pressure. Speed is controlled by the amount of
pressure applied to the trigger switch (2).
WARNING: Do not operate for long periods at low speed
as excess heat can be produced internally in the motor.
8.2 Forward / Reverse Selector (See Fig. E1, E2)
For fastening bolts or nuts, press the forward / reverse selector (1) as
marked “ ” (forward/reverse selector (1) is moved to the right as
shown in Fig. E1). For reverse rotation marked “ ” the forward/
reverse selector (1) is moved to the left as shown in Fig. E2, to loosen
or remove bolts or nuts fullstop.
WARNING: Never change the direction of rotation when
the chuck is rotating, wait until it has stopped!
