ALDI ABP1815MA Скачать руководство пользователя страница 89

Страница: 89 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

MODEL No.:

CSC165XA.9 • 2323 • 05/2019

e-mail:

[email protected]

8. Operation

8.1 Changing The Saw Blade (See Fig. B1, B2, B3)

WARNING: Before undertaking any maintenance or

adjustment, ensure the battery is removed.

Wear protective gloves when mounting the saw blade.

Danger of injury when touching the saw blade.

Only use saw blades that correspond with the technical

specification data for this tool.

Do not under any circumstances use grinding discs as the

cutting tool.

For changing the saw blade, it is best to place the machine on with

the motor end cap on a flat surface with the blade and blade guard

area facing upwards.

Removing the saw blade

WARNING:

Always ensure that the saw is switched of and the

battery pack (16) is removed before making any adjustments.

Press the spindle lock button (4) and keep it depressed.

The spindle lock button (4) may be activated only when the saw

blade (19) is at a standstill.

Loosen the blade bolt (21) in a clockwise direction using the

supplied hex key (24). Remove the outer flange (20). Using the lower

Содержание ABP1815MA









































































































































































Результаты поиска

Содержание ABP1815MA

Отзывы:

Похожие инструкции для ABP1815MA

Бренды по названию

Популярные бренды

ALDI ABP1815MA, Инструкция по эксплуатации

Результаты поиска

Содержание ABP1815MA

Отзывы:

Похожие инструкции для ABP1815MA

Бренды по названию

Популярные бренды