ALDI ABP1815MA Скачать руководство пользователя страница 80

Страница: 80 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

[email protected]

CSC165XA.9 • 2323 • 05/2019

MODEL No.:

CSC165XA.9 • 2323 • 05/2019

5. Product Safety

General safety warnings

WARNING: Read all safety warnings, instructions,

illustrations and specifications provided with this power

tool.

Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or

dust.

Power tools create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while operating a

power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify

the plug in any way.

Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

There

is an increased risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric

shock.

Содержание ABP1815MA









































































































































































Результаты поиска

Содержание ABP1815MA

Отзывы:

Похожие инструкции для ABP1815MA

Бренды по названию

Популярные бренды

ALDI ABP1815MA, Инструкция по эксплуатации

Результаты поиска

Содержание ABP1815MA

Отзывы:

Похожие инструкции для ABP1815MA

Бренды по названию

Популярные бренды