manualshive.com logo in svg

Alcatel-Lucent 7950, Руководство по качеству обслуживания

Ecco 7950 - Высококачественный продукт для профессионального использования. Установка и руководство по эксплуатации включены в инструкцию, которую можно загрузить бесплатно с нашего сайта. Эта подробная информация поможет вам максимально эффективно использовать все функции и возможности этого устройства.

Поделиться
Скачать
background image

Advanced Policy QoS Commands

Page 566

7950 XRS Quality of Service Guide

enqueue-on-pir-zero

Syntax

[

no

]

 enqueue-on-pir-zero

Context

config>qos>adv-config-policy>child-control>offered-measurement

Description

This command is used to enable queuing of new packets when HQoS determines that a queue should stop 
forwarding (operational PIR set to zero). The default behavior is to allow the queue to continue to use the 
previously determined operational PIR and set the queue’s MBS (Maximum Burst Size) to zero. This 
prevents new packets from being admitted to the queue until the PIR zero case terminates. The new behavior 
when 

enqueue-on-pir-zero

 is enabled is to set the operational PIR to zero and leave the queue’s MBS set to 

the normal value. 

This command is ignored for FP1 based forwarding planes as this feature is not supported on Q1 traffic 
management devices. This command overrides the 

limit-pir-zero-drain

 command for FP2 and above 

forwarding planes that are based on the Q2 or greater traffic management devices.

The 

no

 form of this command reverts to default behavior.

granularity

Syntax

[

no

]

 granularity 

{

percent

 

percent-of-admin-pir

 | 

rate

 

rate-in-kilobits-per-second

}

Context

config>qos>adv-config-policy>child-control>offered-measurement

Description

This command is used to create a stepped like behavior where the operational PIR will round up to the 
nearest increment of the specified granularity before being applied to the child. The only exception is when 
the distributed bandwidth is less than 1% above a lower step value in which case the lower step value is 
used.

This stepped behavior may be useful when the bandwidth used by an active child is well known. While the 
above-offered-cap function automatically adds a specified amount to the operational PIR of a child, the 
granularity function only increments the operational PIR to the next step value. While not expected to be 
used in conjunction, the above-offered-cap and granularity commands may be used simultaneously in which 
case the above-offered-cap increase will be applied first followed by the granularity rounding to the next 
step value.

If the granularity command is used with a percent based value, the rounding up function of the configured 
PIR value on the policer or queue is based on the child’s administrative PIR. In this case, care should be 
taken that the child is either configured with an explicit PIR rate (other than max) or the child’s 
administrative PIR is defined using the percent-rate command with the local parameter enabled if an explicit 
value is not desired. When a maximum PIR is in use on the child, the system attempts to interpret the 
maximum child forwarding rate. This rate could be very large if the child is associated with multiple ingress 
or egress ports.

If the child’s administrative PIR is modified while a percent based granularity is in effect, the system 
automatically uses the new relative rounding value the next time the child’s operational PIR is determined.

When this command is not specified or removed, the system makes no attempt to round up the child’s 
determined operational PIR.

The no form of this command is used to remove the operational PIR rounding behavior from all child 

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 7950

Canon Vb-C60 - Ptz Network Camera Setup Manual preview
Vb-C60 - Ptz Network Camera
Бренд: Canon Страницы: 30
Vanguard 340 Installation Manual preview
340
Бренд: Vanguard Страницы: 121
IDT 89HPES16NT2 User Manual preview
89HPES16NT2
Бренд: IDT Страницы: 292
VoiceLine InnoMedia MTA 3328-2R Getting Started Manual preview
InnoMedia MTA 3328-2R
Бренд: VoiceLine Страницы: 18
Xantech RT1610 Installation Instructions Manual preview
RT1610
Бренд: Xantech Страницы: 6
Manson Engineering Industrial SBC-6108 User Manual preview
SBC-6108
Бренд: Manson Engineering Industrial Страницы: 10
ADTRAN 1202880E1 Quick Start Manual preview
1202880E1
Бренд: ADTRAN Страницы: 4
Actisense W2K-1 Install And User Manual preview
W2K-1
Бренд: Actisense Страницы: 14
ActionTec T3280 User Manual preview
T3280
Бренд: ActionTec Страницы: 83
Ericsson Baseband 6648 Manual preview
Baseband 6648
Бренд: Ericsson Страницы: 16
NetApp AFF A250 Manual preview
AFF A250
Бренд: NetApp Страницы: 95
Supermicro SSE-G24-TG4 Stacking Manual preview
SSE-G24-TG4
Бренд: Supermicro Страницы: 16
Planet gsd-1002vhp User Manual preview
gsd-1002vhp
Бренд: Planet Страницы: 32
Billion BiPAC 8700NEXL R2 User Manual preview
BiPAC 8700NEXL R2
Бренд: Billion Страницы: 218
Edimax WAP1200 User Manual preview
WAP1200
Бренд: Edimax Страницы: 96
3Com 3C13866 - Router Channelized E1/PRI FIC Datasheet preview
3C13866 - Router Channelized E1/PRI FIC
Бренд: 3Com Страницы: 4
Tadiran Telecom Coral FlexiCom 6000 Installation Procedure And Hardware Reference Manual preview
Coral FlexiCom 6000
Бренд: Tadiran Telecom Страницы: 340
KonNad C2000-A2-SDX6000-CX1 User Manual preview
C2000-A2-SDX6000-CX1
Бренд: KonNad Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды