Alcatel-Lucent 7950 Скачать руководство пользователя страница 371 | Manualshive

Страница: 371 / 612

Alcatel-Lucent 7950 Скачать руководство пользователя страница 371

7950 XRS Quality of Service Guide

Page 371

create —

Keyword used to create the queue group instance. The

create

keyword requirement can be

enabled/disabled in the

environment>create

context.

policer

Syntax

policer

policer-id

[

create

]

no policer

policer-id

Context

config>qos>queue-group-templates>ingress>queue-group
config>qos>queue-group-templates>egress>queue-group

Description

This command is used in ingress and egress queue-group templates to create, modify, or delete a policer.

Policers are created and used in a similar manner to queues. The policer ID space is separate from the queue
ID space, allowing both a queue and a policer to share the same ID. The ingress queue-group template may
have up to 32 policers (numbered 1 through 32) and may be defined, while the egress queue-group template
supports a maximum of 8 (numbered 1 through 8). While a policer may be defined in a queue-group
template, it is not actually created until the queue-group template is instantiated on the ingress context of a
forwarding plane or on the egress context of a port.

Once a policer is created, the policer's metering rate and profiling rates may be defined, as well as the
policer's maximum and committed burst sizes (MBS and CBS respectively). Unlike queues that have
dedicated counters, policers allow various stat-mode settings which define the counters that will be
associated with the policer. Another supported feature—packet-byte-offset—provides a policer with the
ability to modify the size of each packet based on a defined number of bytes.

Once a policer is created, it cannot be deleted from the queue-group template unless any forwarding classes
that are redirected to the policer are first removed.

The

no

version of this command deletes the policer.

Parameters

policer-id —

The

policer-id

must be specified when executing the policer command. If the specified ID

already exists, the system enters that policer's context to allow the policer’s parameters to be modified.
If the ID does not exist and is within the allowed range for the QoS policy type, a context for the policer
ID will be created (depending on the system's current create keyword requirements which may require
the create keyword to actually add the new policer ID to the QoS policy) and the system will enter that
new policer’s context for possible parameter modification.

Values

1—32 egress

Values

1—8 egress

fc

Syntax

fc

fc-name

[

create

]

no fc

fc-name

Context

config qos>queue-group-templates>egress>queue-group-template

Description

The

fc

command is used to enter the forwarding class mapping context for the given fc-name. Each

forwarding class has a default mapping depending on the egress queue group template. The system created

«
...
369
370
371
372
373
...
»

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов