Alcatel-Lucent 7950 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 612

Alcatel-Lucent 7950 Скачать руководство пользователя страница 2

All specifications, procedures, and information in this document are subject to change and revision at any time
without notice. The information contained herein is believed to be accurate as of the date of publication. Alcatel-
Lucent provides no warranty, express or implied, regarding its contents. Users are fully responsible for application
or use of the documentation.

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks
are the property of their respective owners.

Copyright 2015 Alcatel-Lucent.

All rights reserved.

Disclaimers

Alcatel-Lucent products are intended for commercial uses. Without the appropriate network design engineering,
they must not be sold, licensed or otherwise distributed for use in any hazardous environments requiring fail-safe
performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic
control, direct life-support machines, or weapons systems, in which the failure of products could lead directly to
death, personal injury, or severe physical or environmental damage. The customer hereby agrees that the use, sale,
license or other distribution of the products for any such application without the prior written consent of
Alcatel-Lucent, shall be at the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent
harmless from any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the
use, sale, license or other distribution of the products in such applications.

This document may contain information regarding the use and installation of non-Alcatel-Lucent products. Please
note that this information is provided as a courtesy to assist you. While Alcatel-Lucent tries to ensure that this
information accurately reflects information provided by the supplier, please refer to the materials provided with any
non-Alcatel-Lucent product and contact the supplier for confirmation. Alcatel-Lucent assumes no responsibility or
liability for incorrect or incomplete information provided about non-Alcatel-Lucent products.

However, this does not constitute a representation or warranty. The warranties provided for Alcatel-Lucent products,
if any, are set forth in contractual documentation entered into by Alcatel-Lucent and its customers.

This document was originally written in English. If there is any conflict or inconsistency between the English
version and any other version of a document, the English version shall prevail.

«
1
2
3
4
...
»

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов