manualshive.com logo in svg

Alcatel-Lucent 7950, Руководство по качеству обслуживания, Страница: 281 / 612

Поделиться
Скачать
Alcatel-Lucent 7950 Скачать руководство пользователя страница 281

7950 XRS Quality of Service Guide

Page 281

network-queue 

command.

The 

no

 form of this command restores the default high priority reserved size.

Parameters

percent — 

 The percentage reserved for high priority traffic on the queue. If a value of 10KBytes is desired, 

enter the value 10. 

Values

0 — 100, default

mbs

Syntax

mbs 

size 

[

bytes

 |

 kilobytes

]

no mbs

Context

config>qos>sap-egress>queue
config>qos>sap-ingress>queue

Description

The Maximum Burst Size (MBS) command provides the explicit definition of the maximum amount of 
buffers allowed for a specific queue. The value is given in bytes or kilobytes and overrides the default value 
for the context.

The MBS value is used by a queue to determine whether it has exhausted all of its buffers while enqueuing 
packets. Once the queue has exceeded the amount of buffers allowed by MBS, all packets are discarded until 
packets have been drained from the queue.

The sap-ingress context for mbs provides a mechanism for overriding the default maximum size for the 
queue.

The sum of the MBS for all queues on an ingress access port can oversubscribe the total amount of buffering 
available. When congestion occurs and buffers become scarce, access to buffers is controlled by the RED 
slope a packet is associated with. A queue that has not exceeded its MBS size is not guaranteed that a buffer 
will be available when needed or that the packets RED slope will not force the discard of the packet. Setting 
proper CBS parameters and controlling CBS oversubscription is one major safeguard to queue starvation 
(when a queue does not receive its fair share of buffers). Another is properly setting the RED slope 
parameters for the needs of services on this port or channel.

The 

no

 form of this command returns the MBS size assigned to the queue to the value. 

Default

default

Parameters

size 

[

bytes

 | 

kilobytes

]

 — 

The size parameter is an integer expression of the maximum number of bytes or 

kilobytes of buffering allowed for the queue. The default unit is kilobytes; to configure the MBS in 
bytes specify the bytes parameter. A value of 0 causes the queue to discard all packets. The queue MBS 
maximum value used is constrained by the pool size in which the queue exists and by the shared pool 
space in the corresponding megapool.

Values

0 — 131072 or default 
Minimum configurable non-zero value

1byte 

Minimum default value

maximum of 10ms of PIR or 64Kbytes

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов