manualshive.com logo in svg

Alcatel-Lucent 7950, Руководство по качеству обслуживания, Страница: 308 / 612

Поделиться
Скачать
Alcatel-Lucent 7950 Скачать руководство пользователя страница 308

Queue Group Applications

Page 308

7950 XRS Quality of Service Guide

Since queue redirection is defined per forwarding class, it is possible to redirect some forwarding 
classes to a queue group while having others on the SAP use the SAP local queues. This is helpful 
when shared queuing is only desired for a few applications such as VOIP or VOD while other 
applications still require queuing at the SAP level.

Network Port Queue Groups for IP Interfaces

Queue groups may be created on egress network ports in order to provide network IP interface 
queue redirection. A single set of egress port based forwarding class queues are available by 
default and all IP interfaces on the port share the queues. Creating a network queue group allows 
one or more IP interfaces to selectively redirect forwarding classes to the group in order to 
override the default behavior. Using network egress queue groups it is possible to provide 
dedicated queues for each IP interface.

Note that non-IPv4/non-IPv6/non-MPLS packets will remain on the regular network port queues. 
Therefore, when using an egress port-scheduler it is important to parent the related regular 
network port queues to appropriate port-scheduler priority levels to ensure the desired operation 
under port congestion. This is particularly important for protocol traffic such as LACP, EFM-
OAM, ETH-CFM, ARP and IS-IS, which by default use the FC NC regular network port queue.

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов