manualshive.com logo in svg

Alcatel-Lucent 7950, Руководство по качеству обслуживания, Страница: 199 / 612

Поделиться
Скачать
Alcatel-Lucent 7950 Скачать руководство пользователя страница 199

7950 XRS Quality of Service Guide

Page 199

cir cir-percent  — 

The 

cir

 keyword is optional and when defined the required cir-percent CIR parameter 

expresses the policer’s CIR as a percentage of the immediate parent root policer/arbiter rate or the FP 
capacity.

Values

Percentage ranging from 0.00 to 100.00. 

Default

100.00

profile-capped

Syntax

[

no

]

 profile-capped

Context

config>qos>sap-ingress>policer
config>qos>sap-egress>policer
config>qos>queue-group-templates>ingress>queue-group
config>qos>queue-group-templates>ingress>queue-group

Description

Profile capped mode enforces an overall in-profile burst limit to the CIR bucket for ingress undefined, 
ingress explicit in-profile, egress soft-in-profile, and egress explicit in-profile packets. The default behavior 
when profile-capped mode is not enabled is to ignore the CIR output state when an explicit in-profile packet 
is handled by an ingress or egress policer.

The profile-capped mode makes two changes:

•

At egress, soft-in-profile packets (packets received from ingress as in-profile) are treated the same 
as explicit in-profile (unless explicitly reclassified as out-of-profile) and have an initial policer state 
of in-profile.

•

At both ingress and egress, any packet output from the policer with a non-conforming CIR state are 
treated as out-of-profile (out-of-profile state is ignored for initial in-profile packets when profile 
capped mode is not enabled)

Default

no profile-capped

profile-out-preserve

Syntax

[

no

]

 profile-out-preserve

Context

config>qos>sap-egress>policer

Description

This command specifies whether to preserve the color of offered out-of-profile traffic at sap-egress policer 
(profility of the packet can change based on egress CIR state).

When enabled, traffic determined as out-of-profile at ingress policer will be treated as out-of-profile at sap-
egress policer.

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов