Alcatel-Lucent 7950 Скачать руководство пользователя страница 334 | Manualshive

Страница: 334 / 612

Alcatel-Lucent 7950 Скачать руководство пользователя страница 334

Network IP Interface Forwarding Class-Based Redirection

Page 334

7950 XRS Quality of Service Guide

Provisioning Model

This provisioning model allows the mapping of one ore more PWs to the same instance of queues,
or policers and queue, which are defined in the queue-group template.

Operationally, the provisioning model consists of the following steps:

1. Create an egress queue-group template and configure queues only or policers and queues

for each FC which needs to be redirected.

2. Apply the queue-group template to the network egress context of all IOM3/IMM ports

where there exists a network IP interface which the PW packets can be forwarded on.
This creates one instance of the template on the egress of the port. One or more instances
of the same template can be created.

3. Configure FC-to-policer or FC-to-queue mappings together with the redirect to a queue-

group in the egress context of a network QoS policy. No queue-group name is specified
in this step which means the same network QoS policy can redirect different PWs to
different queue-group templates.

a.

Apply this network QoS policy to the egress context of a spoke-sdp inside a
service or to the egress context of a PW template and specify the redirect queue-
group name.

b. One or more spoke-sdp’s can have their FCs redirected to use queues only or

queues and policers in the same queue-group instance.

The following are the constraints and rules of this provisioning model:

1. Queue-groups containing queues only or policers and queues can be instantiated in the

network egress context of an Ethernet port on IOM3/IMM.

2. When a port is a LAG, one instance of the queue-group is instantiated on each member

link.

3. One or more instances of the same queue-group name and/or a different queue-group

name can be created in the network egress context of an Ethernet port.

4. The queue-group-name must be unique within all network egress and access egress queue

groups in the system.

5. A user attempt to instantiate the queue-group on the network egress context of a POS port

or a TDM port will fail.

6. When a PW FC is redirected to use a queue or a policer and a queue in a queue-group and

the queue-group name does not exist, the association is failed at the time the user
associates the egress context of a spoke-SDP to the named queue-group. In such a case,
the PW packet is fed directly to the corresponding egress queue for that FC used by the
IP network interface the PW packet is forwarded on. This queue can be a queue-group

«
...
332
333
334
335
336
...
»

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов