manualshive.com logo in svg

Alcatel-Lucent 7950, Руководство по качеству обслуживания, Страница: 444 / 612

Поделиться
Скачать
Alcatel-Lucent 7950 Скачать руководство пользователя страница 444

Egress Port-Based Schedulers

Page 444

7950 XRS Quality of Service Guide

14.

Priority level 3 remaining offered load up to remaining priority rate limit

15.

Priority level 2 remaining offered load up to remaining priority rate limit

16.

Priority level 1 remaining offered load up to remaining priority rate limit

17.

Priority level 1 remaining orphan offered load up to remaining priority rate limit (default 

orphan behavior unless orphan behavior has been overridden in the scheduler policy)

When a queue is inactive or has a limited offered load that is below its fair share (fair share is 
based on the bandwidth allocation a queue would receive if it was registering adequate activity), 
its operational PIR must be set to some value to handle what would happen if the queues offered 
load increased prior to the next iteration of the port virtual scheduling algorithm. If an inactive 
queues PIR was set to zero (or near zero), the queue would throttle its traffic until the next 
algorithm iteration. If the operational PIR was set to its configured rate, the result could overrun 
the expected aggregate rate of the port scheduler.

To accommodate inactive queues, the system calculates a Minimum Information Rate (MIR) for 
each queue. To calculate each queue’s MIR, the system determines what that queue’s Fair 
Information Rate (FIR) would be if that queue had actually been active during the latest iteration 
of the virtual scheduling algorithm. For example, if three queues are active (1, 2, and 3) and two 
queues are inactive (4 and 5), the system first calculates the FIR for each active queue. Then it 
recalculates the FIR for queue 4 assuming queue 4 was active with queues 1, 2, and 3 and uses the 
result as the queue’s MIR. The same is done for queue 5 using queues 1, 2, 3, and 5. The MIR for 
each inactive queue is used as the operational PIR for each queue.

Service/ Egress Port Bandwidth Allocation

The port-based egress scheduler can be used to allocate bandwidth to each service

or

 associated 

with the port. While egress queues on the service can have a child association with a scheduler 
policy on the SAP or multi-service site, all queues must vie for bandwidth from an egress port. 
Two methods are supported to allocate bandwidth to each service 

or

 queue:

1. Service 

or

 queue association with a scheduler on the SAP or multi-service site which is 

itself associated with a port-level scheduler.

2. Service 

or

 queue association directly with a port-level scheduler.

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов