manualshive.com logo in svg

Alcatel-Lucent 7950, Руководство по качеству обслуживания, Страница: 198 / 612

Поделиться
Скачать
Alcatel-Lucent 7950 Скачать руководство пользователя страница 198

Service Ingress QoS Policy Commands

Page 198

7950 XRS Quality of Service Guide

Parameters

{

root

 | 

arbiter-name

} — When the 

parent

 command is executed, either the keyword 

root

 or an 

arbiter-

name

 must be specified.

root — 

The 

root

 keyword specifies that the policer is intended to become a child to the 

root

 arbiter where 

an instance of the policer is created. If the 

root

 arbiter does not exist, the policer will be placed in the 

orphan state.

Default

root

arbiter-name — 

The 

arbiter-name

 parameter specifies that the policer is intended to become a child to one 

of the tiered arbiters with the given arbiter-name where an instance of the policer is created. If the 
specified arbiter-name does not exist, the policer will be placed in the orphan  state.

Default

None

weight

 weight-within-level — 

The 

weight

 

weight-within-level

 keyword and parameter are optional when 

executing the 

parent

 command. When 

weight

 is not specified, a default level of 1 is used in the parent 

arbiters priority level. When 

weight

 is specified, the 

weight-within-level

 parameter must be specified as 

an integer value from 1 through 100.

Default

1

percent-rate

Syntax

percent-rate

 

pir-percent

 [

cir

 

cir-percent

]

no percent-rate

Context

config>qos>sap-egress>policer
config>qos>sap-ingress>policer

Description

The percent-rate command within the SAP ingress and egress QOS policy enables supports for a policer’s 
PIR and CIR rate to be configured as a percentage of the immediate parent root policer/arbiter rate or the FP 
capacity.

This enables the same QOS policy to be used on SAPs on different FPs without needing to use SAP based 
policer overrides to modify a policer’s rate to get the same relative performance from the policer.

If the parent arbiter rate changes after the policer is created, the policer’s PIR and CIR rates will be 
recalculated based on the defined percentage value.

The rate and percent-rate commands override one another. If the current rate for a policer is defined using 
the percent-rate command and the rate command is executed, the percent-rate values are deleted. In a similar 
fashion, the percent-rate command causes any rate command values to be deleted. A policer’s rate may 
dynamically be changed back and forth from a percentage to an explicit rate at anytime.

The 

no

 form of this command returns the queue to its default shaping rate and cir rate.

Parameters

pir-percent  — 

Specifies the policer’s PIR as a percentage of the immediate parent root policer/arbiter rate or 

the FP capacity.

Values

Percentage ranging from 0.01 to 100.00. 

Default

100.00

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов