Alaxala AX2400S series Скачать руководство пользователя страница 157

Страница: 157 / 249

3. Preparation of Interface Cables and Terminals

127

3.2 Network interface specifications

3.2.1 Ethernet 10/100/1000BASE-T

(1) Mode setting on the port

Any of the following modes can be specified for the Ethernet 10/100/1000BASE-T port.
The factory default setting is auto-negotiation.



Auto negotiation (default)



100BASE-TX full duplex (fixed)



100BASE-TX half duplex (fixed)



10BASE-T full duplex (fixed)



10BASE-T half duplex (fixed)

NOTE

The following modes and auto negotiation are applicable to the Ethernet
10/100/1000BASE-T port:



1000BASE-T full duplex



100BASE-TX full duplex



100BASE-TX half duplex



10BASE-T full duplex



10BASE-T half duplex

NOTE

As for 1000BASE-T, the fixed settings and half-duplex communication are not
supported.

(2) Flow control functionality

This function is enabled when the connection is fixed to full duplex.

NOTE

This function is not supported in AX3830S series switches.

(3) Auto MDI/MDI-X functionality

This function is enabled when auto negotiation is specified.

In the fixed settings, MDI-X is always selected.

(4) PoE system

As for the pin assignment of the power supply unit to the AC (PoE) models, Alternative A
defined in IEEE802.3af is used. Power supplies to the power receiver devices conforming
to IEEE802.3af are supported.

For power supply pin assignments on the Switch, see

Table 3-2 Power supply pin

assignment

Содержание AX2400S series

























































































































































































































































Результаты поиска

Содержание AX2400S series

Отзывы:

Бренды по названию

Популярные бренды

Alaxala AX2400S series, Руководство по эксплуатации оборудования

Результаты поиска

Содержание AX2400S series

Отзывы:

Бренды по названию

Популярные бренды