AJA KONA 3G, Инструкция по установке и эксплуатации

Страница: 86 / 145

78
Here’s another 2K crop, this time showing cropped output to a 2K projector:
AJA Control Panel, 2K Crop Tab, Showing a 2K Crop to 2K Projector
In the Format Tab window, this corresponds to:
Once a crop is selected, KONA 3G defaults to the crop being placed in the center area of the
2K frame. You can change or move the cropped area from within the frame by selecting the
green rectangle with the mouse cursor and dragging it to a desired spot.
Tip:
Using the Command key held down in conjunction with the mouse cursor within
the Control Panel 2K Crop screen—while in another application (i.e., Final Cut)—allows
that application to retain control of the KONA output while adjusting the crop. This is
highly useful for visualizing the changes you’re making.
Or, you can also use the arrow buttons at the right of the screen to move the crop area up,
down or sideways. The square button in the center returns the crop area to the center of the
screen. Alternatively, you can also enter a specific X and/or Y pixel offset by typing a number
into the text fields above the arrow buttons.