AJA KONA 3G, Инструкция по установке и эксплуатации

Страница: 74 / 145

66
SDI Output Tab
Screen
The SDI Output tab shows the current settings for both of the SDI outputs. Because the
outputs can be configured independently, one output may be the Primary format and the
other output may be the Secondary format. If an input/output has no video, it will be
indicated on the block diagram (“No Video”).
SDI Output Tab Screen Settings
Separate information panes will be listed (as applicable) for SDI Outputs 3 and 4. Information
that can appear includes the following items. You can view the current setting or select
another from the pulldown menu to change to it:
AJA Control Panel, SDI Output Tab
Primary
—when selected, this indicates that the SDI output is set to the same format as the
framebuffer. That value will be listed in blue.
Secondary —when selected, this indicates that the SDI output is set to a format different from
the framebuffer (Primary Format). That secondary format value will be listed in green.
This shows that active processing of the video is taking place (format change and
possibly even up/down-conversion).
Pulldown menu
Output Select