AJA KONA 3G, Инструкция по установке и эксплуатации

Страница: 64 / 145

56
AJA Control Panel, Test Pattern Choices
Hold Last Application : this selection directs KONA 3G to hold and output the last frame
of video from the last application to control KONA 3G. This can be helpful when
operating in an environment where you're switching back and forth between multiple
application windows.
Tip:
pressing and holding the Apple COMMAND key while clicking in the KONA Control
panel—while in any software application (Final Cut, etc.)—causes control of the KONA
card to stay with that application, rather than shifting to the Control Panel. This works
regardless of the setting of “Default KONA Output.”
Genlock
(
Freerun
,
Ref In
,
Input 1
, or
Input 2
)—selects how KONA 3G will synchronize program
video:
Freerun: In this mode, KONA 3G generates sync without an external reference source
Ref In: Directs KONA 3G to use the Ref Video source for sync (usually an analog black burst
video signal)
Video: Directs KONA 3G to use whichever video input source has been selected in the
Inputs tab window for sync
Timing
(
Horiz
and
Vert
)—these two pull-downs allow output timing adjustment with
reference to the Ref Video source selected. The Horizontal reference can be adjusted by
selecting a number of pixels (clocks) to offset. Vertical can be adjusted by specifying a
number of lines to offset.