AJA KONA 3G, Инструкция по установке и эксплуатации

Страница: 81 / 145

1
73
KONA 3G Installation and Operation Manual — Standard Mode Control
50Hz
unchecked if they work solely in a 60Hz editorial environment. The same might be
true for users who do not intend to work with true progressive 1080 material.
Note: If a prompt occurs in Final Cut Pro stating that the AJA output device is missing, this
may be due to the Active Video Filter for a given parameter being unchecked for the format
selected in the application. If this occurs, make the appropriate selection in the Control
Panel application and re-enter Final Cut Pro where the selection should now be available.
Also you should manage the selections in this checkbox list for the specific formats used in
your particular edit session. If you use too many selections, you might still get the above
Final Cut Pro prompt.
The RED checkbox is designed to enable video output support for the unique geometries
associated with RED proxy files or media transcoded from RED source R3D files. Without
this checkbox enabled, playback of RED footage (proxy or transcoded files) will require
Final Cut Pro to handle the scaling of the video to a standard video output size, such as
1920x1080.
Audio Setup Tab
Screen
This screen shows the current settings for that analog audio output, and allows you to re-
configure it when desired. For details on DBL double-speed transfer settings, refer to
“Double
Speed Transfer for KONA 3G and Sony HDCAM SR” on page 26
.
AJA Control Panel, Audio Setup Tab