AJA KONA 3G, Инструкция по установке и эксплуатации

Страница: 72 / 145

64
Input Select Tab
Screen
On the Inputs screen you can view the currently selected video and audio input sources and
map audio sources to the channels supported by Final Cut Pro (more on this later). Two
information panes in the screen are provided: Video Input and Audio Input.
AJA Control Panel, Inputs Tab
Input Select Tab Settings
Video Input —the pulldown menu allows you to see and change what's currently selected
and the video format that KONA 3G has detected (if any). In the example shown
previously, it shows that video is selected at the SDI 1 input and the format is 1080i with a
frame rate of 29.97. Since this text is shown in blue, you can tell that it matches the
framebuffer's primary format selected in the “Formats” screen. By looking at the input
source, you can determine how the primary format should likely be set (unless you want
to perform a conversion on input.) If you wish to select a different input use the pulldown
to select either SDI 2 or Dual Link if your source is 4:4:4 RGB or Stereo 3D.