AJA Ki Pro GO Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 65

AJA Ki Pro GO Скачать руководство пользователя страница 9

Ki Pro GO File Based Recorder/Player v1.0 9

www.aja.com

Chapter 2 – Ki Pro GO at a Glance

Front Panel

Figure 1. Ki Pro GO Front Panel

USB 3.2

Gen 1

Ports (4)

User

Control Knob

Headphone

Output

Function

Button

Status LEDs

(4)

Power

On/Off

VTR-style Transport

Control Buttons

Display, Config,

Status, and

Media Access

Buttons

Headphone

Volume

High Res. Display

Video Sources & Menu Overlay

The Ki Pro GO front panel includes:

•  Four USB 3.2 Gen 1 (5 Gbps) ports, with status LEDs
•  Large LCD display, with video monitoring and menu and status overlays
•  User Control Knob for menu navigation and adjusting parameters
•  DISP, STATUS, CONFIG, and MEDIA menu access buttons
•  FUNC button, for rapid configuration
•  Transport controls
•  Headphone volume control and headphone jack
•  Power button

USB Media Ports

The four USB media ports on the front each receive standard pre-formatted USB

media. A fifth USB media port is available on Ki Pro GO's rear panel.
These five ports are USB 3.2 Gen 1 (5 Gbps), support 5V 1A max current per port,

and are also compatible with the following standards:

•  USB 2.0 (480 Mbps)
•  USB 3.0 (5 Gbps)*
•  USB 3.1 Gen 1 (5 Gbps)*

*Also referred to as SuperSpeed USB

USB Port LED Status Indicators

The USB LEDs indicate the state of the media ports, and when it is safe to remove

media from Ki Pro GO.

• Off - No media is mounted or the inserted media is not usable. Media in that

port (if present) cannot be used and can safely be removed.

«
...
7
8
9
10
11
...
»

Содержание Ki Pro GO


































































Отзывы:

Нет отзывов