manualshive.com logo in svg

AJA Ki Pro GO, Инструкция по установке и эксплуатации, Страница: 17 / 65

Поделиться
Скачать
AJA Ki Pro GO Скачать руководство пользователя страница 17

Ki Pro GO File Based Recorder/Player v1.0 17 www.aja.com

 

Figure 5.  Ki Pro GO Handle Assembly

1.  Remove the two screws from the right side of the enclosure  and keep for 

reuse.

2.  Place the Shield with Spacer (temporary) on top of the Enclosure, aligning 

the holes.

3.  Slide the Support into the Handle.
4.  Place the Handle on top of the Shield, aligning the holes.
5.  Place the Clamps on top of the Handle, aligning the holes.
6.  Insert the two screws through the Clamps, Handle, Support, and Shield and 

into the enclosure.

7.  Snap the Caps over the Clamps and tear away the Spacer from the Shield.

Optional Ki Pro Shelf

AJA offers this rack-mount shelf accepting two Ki Pro units in a 2RU footprint. 

For example, in the same rack you can mount two Ki Pro GOs to simultaneously 

record eight sources, or you can mount a Ki Pro Ultra Plus and a Ki Pro GO, which 

allows simultaneous recording of high resolution .MOV or .DNX files, as well as 

separate compressed .MP4 clips for immediate delivery to a client or for direct use 

as proxy media for post production. 

Figure 6.  Ki Pro GO mounted in Rackmount Shelf with a Ki Pro Ultra Plus. 

NOTE:  The AJA part number for the optional Ki Pro Shelf is "KPU-SHELF." Please check 

with your AJA reseller for pricing and availability. 

Содержание Ki Pro GO


































































Отзывы:

Нет отзывов