Ki Pro GO File Based Recorder/Player v1.0 12 www.aja.com
FUNC Button
The FUNC button can be configured to either directly access the Playback Media
Source menu, or be disabled.
Transport Control Buttons
The transport buttons are always active, except during actual recording when
only the STOP button can be used.
STOP -
The square symbol STOP button has a dual function. When playing back
a clip (PLAY, FFWD, or REV) the first push of STOP pauses the playback. When
paused, the current frame of the clip is displayed as a still, and the STOP
button flashes indicating that clip is paused. A second push of STOP stops the
playback. The STOP button is fully illuminated in stop mode.
PLAY > -
Press PLAY to begin forward playback of the current clip at normal
speed.
RECORD-
Press the round red RECORD button to begin recording. Once in
RECORD mode, all other transport buttons are locked-out except the STOP
button.
FFWD >> -
Press FFWD to begin fast playback of the current clip at 2x speed.
Successive pushes increase the speed to 4x, 8x, and 16x. (Pushing the button
after 16x speed is reached has no further effect.) When fast-forwarding, audio
is muted.
REV << -
Press REV when not highlighted to begin playback of the current clip in
reverse at 1x speed. Successive pushes increase the speed to 2x, 4x, 8x, and
16x. (Pushing the button after 16x speed is reached has no further effect.)
When playing in reverse, audio is muted for all speeds.
Power ON/OFF Button
Press the Power button to turn Ki Pro GO power On and Off. When power is On
the button is illuminated.
NOTE: When power is first applied to Ki Pro GO, the unit powers up immediately
(without pressing the button). This facilitates a quick return to operation if there is
a power interruption.
In normal operation to turn power on, press the button once. Pressing the button
will begin power-up and display start-up progress on the front panel display.
To power down, press and hold the power button down for three seconds (the
display will count down). This process prevents accidental power-off during
normal operation. You can abort the power-down process by simply removing
your finger from the power button before the three seconds have elapsed.
Headphone Jack and Volume Knob
1/8” (3.5mm) miniature stereo TRS connection is available for standard stereo
headphones.
To adjust headphone listening level, press the volume knob in and the knob will
pop out for easy adjustment. After adjustment, you can press the knob back in to
reduce the chance of accidental headphone level changes.