AJA Ki Pro GO Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 65

AJA Ki Pro GO Скачать руководство пользователя страница 38

Ki Pro GO File Based Recorder/Player v1.0 38 www.aja.com

All Ki Pro GO web UI screens have certain areas in common.

• At the top of each screen are transport controls, including a red RECORD

button. These Web UI transport buttons are linked to the hardware transport

buttons located on the Ki Pro GO's front panel.

• A display on the left reports the record or playback time for the current clip.
• On the left of each screen is a Menu panel listing the available Ki Pro GO web

UI screens. Click any of these items to jump to that screen.

• The Alarms pane below reports Ki Pro GO alarm conditions.
• On the right side of each screen is a Connection panel. This area shows the

connection status and Ki Pro GO's serial number and software version. This

latter information is useful if you call AJA for technical support.

• Below the Connection panel, the Network panel shows AJA devices on the

network, and allows you to switch your connection to a different device by

clicking on that device's name.

• In the middle of each screen are the menu parameter choices and information

pertaining to that screen.

The blue circled arrow icons can be clicked to toggle a pane open or closed.
Standard scroll bars on the right and bottom allow screen navigation, and are

hidden when the entire screen's height or width is displayed.
Hovering your mouse cursor over a parameter name brings up a tooltip

describing that parameter.
Right clicking on a parameter name lets you reset that value to the factory

default.

Ki Pro GO Web UI Screens

Ki Pro GO Web UI screens closely mirror the parameter menus displayed on its

front panel, with some variations.

Status Screen

The Status screen (see

Figure 16 on page 37

) displays the same Chnl/Input and

File/Encode status information as shown on that Ki Pro GO's front panel Status

menu (see

"Status Screen" on page 38

) except alarms are not displayed in this

panel.
On the Ki Pro GO Web UI you can see alarm messages at any time by opening the

Alarms pane on the left.

Figure 17. Alarms Panel

«
...
36
37
38
39
40
...
»

Содержание Ki Pro GO


































































Отзывы:

Нет отзывов