Ki Pro GO File Based Recorder/Player v1.0 28 www.aja.com
NOTE: Ki Pro GO attempts to make the transitions between multiple clip playback as
clean as possible, but some momentary distortion may occur depending on the
types of clips being played.
3. Press the
PLAY
button. The clip(s) will play as specified.
4. When playing back a clip (PLAY, FFWD, or REV) the first push of STOP
enables a “Pause” mode. Playback is paused, the current frame of the clip is
displayed, and the STOP button flashes. A second push of STOP completely
stops the playback.
The Playback Type setting remains in force until it is changed in the MEDIA menu.
Loop Playback
You can control whether a clip or series of clips are played once, or are played
back repeatedly.
1. Select and cue the desired clip.
2. Press
MEDIA
, scroll to the
34.2 Loop Playback
menu and set the desired
manner of playback.
•
On
- Will play the selected clip to the end and repeat its playback from the
beginning.
• If
Clip
is selected above, only that individual clip will play repeatedly
until stopped by the user.
• If
All
is selected above, that clip and all the following clips will play in
turn, and then repeat playback again in that sequence from the first clip
played until stopped by the user.
•
Off
- Plays the selected clip, or all clips on that media, once through and
then stops. When done, the last playing clip is paused, and a still image of
the last frame will be output.
3. Press the
PLAY
button. The clip(s) will play as specified.
The Loop Playback setting remains in force until it is changed in the MEDIA menu.
CONFIG Menus
The CONFIG menus provides controls that allow configuring various aspects of
how Ki Pro GO operates.
CONFIG Menu Parameters
1.0 Enable Channel 1
Enables Channel 1 for clip recording and/or playback. When disabled that channel
cannot not be used.
Enable (default)
Disable
Channel 1 is enabled.
Channel 1 is disabled.