AJA Ki Pro GO Скачать руководство пользователя страница 43

Страница: 43 / 65

Ki Pro GO File Based Recorder/Player v1.0 43 www.aja.com

Figure 25. Network Panel, IP Address Change Confirmation

3. Click

Confirm

Ki Pro Go will reset its network configuration and the Web UI will reconnect to it,

if a valid network configuration was entered.

Firmware Screen

The Firmware screen allows you to update your Ki Pro GO to a newer version

of firmware as issued by AJA. Firmware updates often contain new features,

improvements, and bulletins that may be very useful to you.

Figure 26. Ki Pro GO Firmware Screen

Firmware Update Procedure

1. Download the Latest Ki Pro GO firmware. Current and past releases of

Ki Pro GO firmware are available from AJA’s website:

https://www.aja.com/products/ki-pro-go#support

If your Ki Pro GO has access to the Internet, you can also directly reach this

location by clicking the

Ki Pro GO Support Page

button on the Ki Pro GO's

Firmware screen.

2. Select the Ki Pro GO firmware file for download from the website.
The firmware image to install on your Ki Pro GO has an ".ajas" extension.

Depending on your PC or Mac operating system settings, the extension may not

be visible to you in a file directory.
3. Go to the Ki Pro GO Firmware screen.
4. Click

Choose File

and navigate to the downloaded Ki Pro GO firmware file.

5. When a valid Ki Pro GO firmware file has been selected, click

Upload

. The

file is tested for validity. Incomplete, corrupted, or non-Ki Pro GO firmware

files will be rejected.

6. Agree to the steps and confirmation prompts as they are presented. Wait

for the procedure to complete (it will take only a few minutes). When done,

Ki Pro GO will prompt you to restart your machine.

Содержание Ki Pro GO


































































Результаты поиска

Содержание Ki Pro GO

Отзывы:

AJA Ki Pro GO, Инструкция по установке и эксплуатации, Страница: 43 / 65

Результаты поиска

Содержание Ki Pro GO

Отзывы: