AJA Ki Pro GO Скачать руководство пользователя страница 30

Страница: 30 / 65

Ki Pro GO File Based Recorder/Player v1.0 30 www.aja.com

6.2 Headphone Audio

Selects which channel's audio is routed to the headphone output. This setting

also affects the rear RCA audio monitor jacks and the front panel VU meters.

Select from:

• Channel 1 (default), 2, 3, or 4

7.0 3G SDI Level

This parameter allows the 3G SDI output to be configured for either Level A or

Level B. While many 3G SDI devices will support both Level A and Level B, some

devices may need a specific 3G SDI selection to operate as expected.

Level B (default)

Level A

For use with devices that accept or require Level B.

For use with devices that accept or require Level A.

7.1 HDMI/EDID Override

This parameter determines whether the HDMI Output is auto-negotiated with the

receiving device via EDID (extended display identification data) or via a specified

output type.

Auto (default)

YCbCr

RGB

The HDMI output is negotiated automatically with the receiving

device via EDID.

Configures the HDMI output for 10-bit YCbCr 422

Configures the HDMI output for 8-bit RGB

NOTE: Typically, you will want to simply leave the selection configured for Auto so that

the negotiation between the devices is handled automatically.

7.2 Inter/PsF Override

This parameter defines the frame recording method.

Auto (default)

PsF

Interlaced

Automatically selects the method, depending on input format.

Incoming video with frame rates of 23/24 are assumed to be

PsF, and 25/29/30 sources are assumed to be interlaced, and

each is converted accordingly.

All 'interlaced' sources are assumed to actually be PsF and will be

converted accordingly.

All 'interlaced' sources are assumed to actually be interlaced and

will be converted accordingly.

7.3 Progressive Playback

This parameter defines the format applied when progressive media is played

from storage.

Progressive (default)

Interlaced

Playback as standard progressive frame.

Playback as interlaced.

NOTE: HDMI output of progressive material requires the use of 1080p Playback set to

Progressive; HDMI tends to support true progressive or interlace video, not PsF.

7.4 Genlock Source

This parameter selects the source of reference to genlock to during idle, record

and playback.

Содержание Ki Pro GO


































































Результаты поиска

Содержание Ki Pro GO

Отзывы:

AJA Ki Pro GO, Инструкция по установке и эксплуатации, Страница: 30 / 65

Результаты поиска

Содержание Ki Pro GO

Отзывы: