Ki Pro GO File Based Recorder/Player v1.0 14 www.aja.com
During clip playback, all four SDI Channel output BNCs will carry the same video
and audio signals of that playing clip.
IMPORTANT: During recording, an SDI BNC output signal is not a pass-through E-to-E
signal of the input, and is not necessarily linked to the same numbered SDI input
BNC connector.
During clip recording, a delay exists between the each of the Ki Pro GOs' video
input and output signals:
• Three frames at 23.98, 24, 25, 29.97, 30
• Six frames at 50, 59.94, 60
• The Ki Pro GO output will also add/drop frames if the input is not aligned with
the sync source.
VPID is preserved by re-inserting on the output, but all other ANC data will be
lost. Embedded audio can be preserved and re-inserted on the output. Audio is
sample-rate-converted prior to re-insertion.
NOTE: Which two audio channels are embedded into each SDI Output is determined by
the audio embedding settings being used for that Ki Pro GO recording channel
audio input setting, to either follow the video input's embedded audio or embed
the analog audio inputs.
HDMI Inputs
Four full size input HDMI connectors are provided, each supporting 3G-SDI video
up to 1080p 60, and each accepts the first two channels of embedded digital
audio.
Ki Pro GO accepts 32 kHz, 44.1 kHz, and 48 kHz sample rate HDMI embedded
audio, and converts it to 48 kHz internally.
Each input can be routed to any or all of the five Ki Pro GO recording channels. Up
to four video inputs can be recorded as clips at the same time.
NOTE: When using the Ki Pro GO HDMI connection and attaching it to any HDMI audio
or video accessory, you must use a ferrite-beaded HDMI cable, HH-28F-06,
between the HDMI output port of the Ki Pro GO and the HDMI accessory to
maintain regulatory compliance.
SDI Monitor Out
One SDI Monitor Out BNC connector allows monitoring the video and embedded
audio output of one or all of the Ki Pro GO's recording/playback channels. Which
channel(s) are monitored is determined by the setting of the SDI Monitor Channel
parameter.
HDMI Monitor Out
One full size HDMI Monitor Out connector allows monitoring the video and
embedded audio output of one or all four of the Ki Pro GO's recording/playback
channels. Which channel(s) are monitored is determined by the setting of the
HDMI Monitor Channel parameter.
Balanced Analog Audio Inputs
Two XLR connectors provide Mic/Line/48V analog audio input, which can be
routed to any or all of the Ki Pro GO recording channels.