AJA Io Express, Инструкция по установке и эксплуатации

Страница: 123 / 132

1
113
Io Express Installation and Operation Manual — Using Autodesk Combustion 2008
Activation
Note: Only one plugin window can have control of Io Express at a time. If the application
window you click on does not access the card (panel fields are inactive), either another
window is still processing operations or it may be in Manual activation mode and requires
manual disabling (check box blanked) to release control of Io Express. Activation mode is
available in these applications: Machina, Adobe After Effects CS4, and Adobe Photoshop
CS4.
Primary &
Secondary Formats
The Primary Format menu allows you to select the video format to be used in the current project
in the Io Express framebuffer. (The current selection is reported in the display of the pull-down
menu.)
Choices are always presented based on which AJA capture device you are using and what signal
formats it supports. Io Express supports video format down-conversions..
Primary Video Formats Supported
See “About Primary & Secondary Video Formats” on page 2 for Primary/Secondary video format
and down-conversion information.
SDI Output
Io Express has one SDI output so the SDI output will be Single Link.
Analog Output
Analog format choices in the Analog Output pull-down menu vary depending upon file format.
Choices that may be available include:
•
Composite PAL
•
Component Betacam NTSC
•
Component Betacam PAL
•
Component Betacam NTSC-J
•
Component SMPTE PAL
•
Component SMPTE
•
Component XVGA (High Definition only)