AJA Io Express, Инструкция по установке и эксплуатации

Страница: 79 / 132

1
69
Io Express Installation and Operation Manual — Play Window
Edit Mode Play Controls and Scrub Bar
Below the Play buttons is a Scrub Bar that allows you to click and drag along the loaded
sequence to view individual frames and mark In/Out- points for playback of frame subsets. To
set an in-point, click on the left bracket. To set an out-point, click on the right bracket.
To set an in-point, click on the left-most hot text numeral below the bar and enter the desired
frame number. Similarly, enter the out-point by clicking on the right side hot text numeral.
Note: The “first” or “last” frame may be for the entire sequence or for frames in an in/out-
marked subset. In this case, first, last, in, and out frames become “Most Significant Frames.”
For example, clicking on the Go-to-1st button will move you to the first Most Significant
Frame to the left. Clicking on the Go-to-Next button will move you to the first Most
Significant Frame to the right.
The slider on the bottom is a variable speed forward/reverse control. Positions from left to right
are: (Reverse) 16x, 8x, 4x, 2x, 1/2, 1/4, Still, (Forward) 1/4, 1/2, 2x, 4x, 8x, and 16x.
Play Modes
Select a Play type by clicking the Play hot toggle buttons above the controls. Choose between:
Play All or Play Range.
You can select one of three Play Modes by clicking on the Play Mode arrow to the left of the
slider control. You will step through the following modes:
• Once (single arrow) – play once through in forward or reverse
• Bounce (double-ended arrow) – play continuously, alternating between forward and
reverse play
•
Loop (double right-pointing arrow) – play repeatedly, looping in one direction
Go-to-Previous “Most Significant” frame Reverse 1 frame
Rewind (8x) Reverse Play
Still Stop
Play (1x) Fast Forward (8x)
Forward 1 frame Go-to-next “Most Significant” frame
Play Entire Clip or Marked Segment
Play Mode Arrow