D i r e c t m o d e ( D M O )
Changing DMO group, channel or scanning state
When DMO is activated, the network mode (TMO) groups and folders are
replaced with DMO channels and groups in the PMR Status Bar. You can
change the DMO channels and groups in the same way as changing the TMO
groups and folders. For more information, see chapter
.
Changing the DMO group
To change the DMO group, open the group list of the DMO channel:
1. Open the
TETRA Talk Groups
app.
2. Tap the name of the DMO channel in the Channels view.
The DMO channels are listed in the order defined by your organisation.
The selected DMO channel and group are marked with a green bar, in the
same way as the TMO folder and group are marked.
Note that it may take some time for the group list to be loaded if you are
opening the group list of a non-selected DMO channel. The progress of the
loading is shown by Indeterminate Progress Bar.
3. To change the selected DMO group:
•
Tap the group’s name in the group list. Press the
button.
or:
•
Press the group’s name in the group list. When prompted to confirm the
selecting of the group, answer
Yes
.
Changing the DMO channel
If you want to change the DMO channel:
1. Open the
TETRA Talk Groups
app.
2. Press the channel’s name and confirm that you want to change the
selected channel.
If you try select a DMO channel you are not allowed to use, the failing of
the operation it is indicated by a message and an error tone.
Dabat_en_print.book Page 63 Mardi, 27. novembre 2018 5:08 17
