B a s i c s o f T a c t i l o n D a b a t
•
Switching the loudspeaker on or off.
Press and hold the
button to switch the loudspeaker on or off. If
the loudspeaker is switched off, the audio is routed to the earpiece and
vice versa. A notification informs you whether the loudspeaker is on or off.
You can set the loudspeaker on or off also by using the
option in the
Quick Settings.
•
Activating and deactivating the
Do not disturb
mode.
All audio streams except the voice stream are muted and all vibration
effects - except the vibration feedback of buttons - are switched off also in
incoming emergency calls and man down alert and action. The incoming
audio is muted in group calls, but not in individual calls. The microphones
are not muted, so you can still transmit normally in all calls.
•
To activate the
Do not disturb
mode, press and hold the
Volume -
button. A notification informs you that this mode is activated.
•
To deactivate the
Do not disturb
mode, press and hold the
Volume -
button again or press the V
olume +
button briefly. A notification
informs you that the mode is deactivated.
Note that the
Do not disturb
mode is deactivated when you initiate an
emergency call or when an emergency call is started as a part of the
Man
down action
.If you want to adjust an audio stream which is not the active
audio stream, use the volume settings of the Android system.
Function 1 button
The
Function 1
button opens the
, which provides you a quick
access to the scanning-, network mode- and transmission barring settings.
You can access the
without looking or touching the screen by
briefly pressing the
Function 1
button. A tone is played when the
is opened.
is shown as a selection list on the screen, also when the
screen is locked. Note, however, that opening the
the screen on. If voice feedback is activated, it tells you the current item in the
.
Dabat_en_print.book Page 30 Mardi, 27. novembre 2018 5:08 17
