U s i n g T a c t i l o n D a b a t
To set the
TETRA Services
on or off, tap
the TETRA Services, which opens a
confirmation query asking whether you
want to enable or disable the TETRA
services. To change the settings of
scanning, network operation mode,
mandown detection or voice feedback, use
the state switch (on/off).
The settings related to the
TETRA
Messaging
app are available under
the Messaging section.
Security
settings contain settings related to the phone code and end-to-
end encrypted (E2EE) smart card. There are different settings available
depending on whether an E2EE smart card is inserted in the device or not.
Unavailable settings are disabled in the security settings view.
Changing the Phone code
1. Select
Change Phone code
.
2. Enter the current Phone code and select
OK
.
If you enter an incorrect current Phone code, you are requested to enter
the current Phone code until the code is correct.
3. Enter the new Phone code and select
OK
.
4. Enter the new Phone code again to confirm it. Select
OK
.
Dabat_en_print.book Page 52 Mardi, 27. novembre 2018 5:08 17
