manualshive.com logo in svg

Air Monitor VELTRON DPT 2500-plus, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Air Monitor VELTRON DPT 2500-plus Скачать руководство пользователя страница 25

VELTRON DPT 2500-

plus

Air Monitor Corporation

116-047-20.PMD (5/5/11)

VELTRON DPT 2500-

plus

 - IO&M Manual

5.10 – TRANSDUCER SPAN SELECTION

Displays the natural span (maximum full scale s

pa

n) of the transducer inst

a

lled in the VELTRON DPT 2500-

plus

. The

displayed natural span is for user/technician reference only and should not be changed unless a new transducer of

differential natural span has been inst

a

lled.  Also displays the operating span.

SECTION 5 – OPERATION

20

1. While in Main Menu, use       or       to scroll to:

                 Transducer Span

                      Selection

2. Press       to enter Transducer Span Selection menu. Display will indicate:            Xdcr Natural S

p

an

                      Selection

3. Press       and display indicates the natural sp

a

n of the installed transducer (0.05, 0.10, 0.25, 0.50, 0.75, 1.00,

1.50, 2.00, 2.50, 3.00, 5.00, 10.00, 15.00, 25.00, 50.00, 100.00, 150.00, 200.00, or 250 in. WC).

4. Use       or       to change setting.  Once desired setting is displayed press       .  New setting will be stored in

memory and display will return to Main Menu.

Caution:  Only change setting if a transducer of different natural span has been inst

a

lled.

Note:  If user desires not to change the setting and return to Main Menu, press       .  Unit will remain

programmed as it was originally.

5. Use       or       to select remaining p

a

rameters to be changed.

6. Follow Step 4 to make any changes to parameters.

7. To return to Main Menu, select Return to MAIN MENU in Transducer Span Selection Menu and press       .

Note: If unit is configured as bi-polar, Xdcr Natural Span selections will be in the form of ±x.xx, and Xdcr

Operating Span will have a Min and Max selection.

X

 -  Auto-Zero Configuration

 

Transducer Span Selection

 -  Transmitter Input Calib. 

- Xdcr Natural Span Selection

- Xdcr Operating Span Selection

- Return to MAIN MENU

Transducer Span Selection

Xdcr Natural Span

0.25 in. WC

Xdcr Operating Span

0.2500 in. WC

Return to

MAIN MENU

  Adjustable from 40% to  

100% of selected Natural 

Span. 

Default selection shown.

Available selections

:

User Setup Main Menu

 

 0.05, 0.10, 0.25, 0.50, 

0.75, 1.00, 1.50, 2.00, 

2.50, 3.00, 5.00, 10.00, 

15.00, 25.00, 50.00, 

100.00, 150.00, 200.00, 

or 250.00

Содержание VELTRON DPT 2500-plus





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды