Aichi SR12CSM, Руководство по эксплуатации с информацией по обслуживанию

Страница: 52 / 78

44
NOTICE
• The high-speed traveling is only possible
when the boom is retracted fully and
lowered to less than 5 degrees. In all other
situations, even if you turn the travel
speed select on “
” (HIGH SPEED), you
will be able to travel only at low speeds.
• Under normal circumstances, keep the
travel speed select switch on “ ” (LOW
SPEED).
3‒2‒2 Forward and Backward
Depress the foot switch and operate both the
travel control levers to the traveling direction.
M085B101
Fig. 8‒19
NOTICE
• A warning buzzer will beep regularly
when the travel joystick controller is being
operated.
• Use the arrow on the chassis to determine
which way is forward and which way is
backward.
Forward
(Green)
Forward
(Green)
Backward
(Red)
Backward
(Red)
M14YH220
Fig. 8‒20
3‒2‒3 Pivot Turn
Depress the foot switch and operate one of
the travel control levers as shown in the figures
below.
1. Forward / Backward left turns
M085B201
Fig. 8‒21
2. Forward / Backward right turns
M085B301
Fig. 8‒22
NOTICE
If the direction of travel cannot be
changed due to road surface conditions,
first adjust the position of the machine
by traveling forward or backward, then
change course.
3‒2‒4 Spin Turn
Depress the foot switch and operate the travel
control levers as shown in the figure below
to make the CW (clockwise) or CCW spin turn
(counter clockwise).
M085B401
Spin turn CW Spin turn CCW
Fig. 8‒23