Aichi SR12CSM, Руководство по эксплуатации с информацией по обслуживанию

Страница: 40 / 78

32
2‒1‒1 Diesel Fuel Specifications
Diesel fuel should comply with the following
specifications. The table lists several worldwide
specifications for diesel fuels. (See Table 7‒1.)
Table 7‒1 Diesel Fuel Specifications
Diesel Fuel Specification Location
ASTM D975
No. 1D S15
No. 2D S15 USA
EN590:96 European Union
ISO 8217 DMX International
BS 2869-A1 or A2 United Kingdom
JIS K2204 Grade No.2 Japan
KSM-2610 Korea
GB252 China
NOTICE
• Never mix kerosene, used engine oil,
or residual fuels with the diesel fuel.
Poor quality fuel can reduce engine
performance and/or cause engine
damage.
• Use fuel with sulfur content of less than
0.0015 % (15 ppm). A higher sulfur content
fuel may cause sulfuric acid corrosion in
the cylinders of the engines.
2‒2 Check the Hydraulic Oil Level
• Maintaining the hydraulic oil at sufficient level
is very important for the machine operation.
Deficient of the hydraulic oil level can damage
hydraulic parts.
• Daily checks from the oil level gauge (Fig. 7‒2)
can confirm the change of the hydraulic oil
level that might show the hydraulic system
problems.
Level gauge
Hydraulic oil tank
Filler port
M179B52-1
Fig. 7‒2
Make sure the machine is level.
Make sure the boom is retracted and lowered
fully.
Check the oil level gauge located on the side of
the hydraulic oil tank.
Add the hydraulic oil if necessary.
2‒2‒1 Hydraulic Oil Specifications
Table 7‒2 Hydraulic Oil Specifications
Grade Recommended oil
ISO VG22 Shell Tellus S2 M 22
or equivalent
NOTICE
For cold regions and other oil, refer
to Section 2 “List of Recommended
Lubricants” under Chapter 12.
2‒3 Check the Battery Fluid Level
CAUTION
The battery fluid contains corrosive acid.
When dealing with the battery, always
wear appropriate protective clothing and
equipment to protect your hands, eyes,
face and body, and avoid contacting
battery fluid.
Check the battery fluid level in each cell. It
should be between the “UPPER LEVEL” and
“LOWER LEVEL” lines.
Upper level
Vent cap
Lower level
M161C120
Fig. 7‒3