Aichi SR12CSM, Руководство по эксплуатации с информацией по обслуживанию

Страница: 50 / 78

42
3. Upper Controls
(from Platform)
DANGER
When using the upper controls, make sure
to wear a safety harness, and put the hook
of the safety harness through the lanyard
anchorage point. Do not hook to any other
place.
M179C92-1
Fig. 8‒16
• Do your work while standing firmly on the
platform. If your feet separate from the
platform, by climbing on the guardrails,
e.g., there is a possibility you will lose your
balance, and fall.
WARNING
• Before operation, make sure the platform
is level. If the platform is tilted, adjust the
platform level by referring to Section 12‒1
Chapter 8 “Platform Level Adjustment.”
• Keep the platform neat and tidy always. To
avoid slips, clear the water, oil, snow, ice
off the platform.
• Before operating the machine, make sure
that no person or obstacle is around the
machine.
• Be especially careful when rotating the
boom. Check that there are no obstacles in
the way before rotating.
• Do not place small objects near the upper
controls. They may catch the controls and
cause incorrect operation.
• When you stop the boom operation and
wish to concentrate on another works,
push in the emergency stop button to
“OFF” to prevent misoperation.
• To prevent misoperation, light up the
upper controls in the dark.
NOTICE
When painting, make sure to close the
cover of the upper controls after the
platform has been put in position, and
keep the decal clean.
3‒1 Foot Switch
NOTICE
• Release the foot switch while working or
not operating. Do not disable the foot
switch in any way e.g. by binding. Failure
to comply with instructions, the foot
switch cancel system is activated and all
controls become disabled. (See Chapter 3).
• Operate controls within 20 seconds after
depressing the foot switch. Failure to do
so, all controls become disabled even
when the foot switch has been depressed.
In that case, release all controls and then
operate again.
Foot switch
M179B32-1
Fig. 8‒17
Except for those listed here, you must depress
the foot switch on the platform while performing
all operations.
• Engine start
• Emergency stop (Stopping the engine)
• Using the horn