AIC COILMASTER 100, Инструкция по установке и обслуживанию для установщика и пользователя

Страница: 31 / 94

I-31
G-084383_EN • 03
P
roduct
I
nstallatIon
Fig. 9. Removing/Installing the Access Panels
4
1
2
3
Removing and Installing the Access Panels
Conditions:
Tools and Material:
î
Wrench, hex head, size 4
Removal Procedure:
Bottom front panel
1. Pull on the panel to disengage the center
stud from its receptacle.
Center Front Panel
1. Release two top screws (
1
) from the left and
right side panels, and one top screw from the
center of the front panel (
2
).
2. Pull the front panel (
4
) to disengage the studs
from their receptacles.
Top panel
1. Release the top screw (
1
) from the right side
panel (if not already removed).
2. Push the top panel (
5
) upwards to disengage
the studs from their receptacles.
Side Panels
1. Remove six screws (
3
) (or five if the front pan-
el and/or top panel have been removed). Re-
tain hardware for reinstallation.
Installation procedure
Bottom Front Panel
1. Push the panel in position to engage the
center stud into its receptacle.
Center Front Panel
1. Push the panel (
4
) in position to engage the
studs into their receptacles.
2. Install and tighten two top screws (
1
) on the
left and right side panels (if the panels have
not been removed), and one top screw (
2
) at
the center of the front panel.
OFF
Top panel
1. Push the top panel (
5
) downwards to engage
the studs into their receptacles.
2. Install and tighten the top screw (
1
) on the
right side panel (if the panel has not been re-
moved).
Side Panels
1. Install six retained screws (
3
) (or five if the
front panel and/or top panel need to be re-
installed).
Follow-on task(s):
None
1
5