www.agxcel.com
2
Important Information
The AgXcel Synergist® system is designed for low volume distribution of NutriSphere-N NH3 at a rate of 32
oz/acre. Higher rates are possible.
Note on ounces per acre
On the Trimble console display, the flow meter will be calibrated to measure this product in
ounces
, not gal-
lons. The display is programmed to show measurements in gallons, so be aware the numbers shown for this
product will actually be in
ounces
.
Ounces per acre means a very small amount of liquid is being distributed. At 6 mph on 30” spacing, 32 oz/
acre means that each row is doing just under 1 oz/min. On a 12 row implement the total amount being dis-
tributed is less than 12 oz/min. AgXcel’s Synergist system has been engineered to distribute this flow evenly
and accurately.
AgXcel’s Low Flow Magnetic Flow Meter
AgXcel’s Synergist system uses an electromagnetic flow meter that is designed to accurately measure flow
on to 10 oz/min. With no moving parts this flowmeter proves to be reliable, accurate, durable, and long
lasting.
Dual Micro tube Solution
AgXcel’s Synergist system uses our Dual Micro tube Solution. Micro tubing eliminates the need for an
orifice. By using a micro tube with an opening 4 to 5 times larger than an orifice, the risks of plugging are
greatly reduced.
By using a Dual Micro tube Solution (two micro tubes), the system will be able to handle a variety of rates
and speeds. As well as handling a wide range of temperature changes that would affect the viscosity of the
product.
Floating Ball Manifold
Each row will be evenly distributed through a visual flow indicator with one or two floating balls. While pro-
viding a good indication of the flow to each row, they do not indicate the exact flow. AgXcel recommends
doing a catch test on each row to verify it’s distribution.
Field Kit
The Synergist system has an optional field kit available (see pg. 29 for details) containing key replacement
parts for your system to reduce equipment downtime.
Product and Rinse Tank
The Synergist comes with a 55 or 110 gallon product tank and 3 gallon rinse tank. The rinse tank can be
filled with RV anti-freeze to allow the system to be flushed when not in use for a period of time, thus pro-
tecting the system from freezing after rinsing.
AgXcel’s Micro Control Valves
Implements that are 60’ or wider can be split into 2 sections to allow section control. Standard single
section setups are equipped with AgXcel’s Micro Control Valve on each floating ball manifold. This allows
the system pump to continuously run when application stops at the end of the field to allow for a quicker
return to the target rate when application resumes. A two section system will have the same Micro Control
Valves but can be configured for two sections.
Содержание Synergist GX40 System
Страница 36: ......