Agrison 100HP CDF, Руководство по эксплуатации

Страница: 172 / 204

存放
Storage
Fig 6-20 双作用油缸
Fig.6-20Double-acting cylinder
1. 下盖 2. 缸体 3. 活塞杆 4. 上盖 5. 蝶形螺母 6. 活塞杆连接叉 7. 定位卡箍 8. 定位阀 9. 活塞
1. Lower cover; 2.Cylinder body; 3. Pistion rod; 4. Upper cover;
6. Piston rod link fork; 7.Position clamp ring; 8. Position valve;
5.Wing nut;
9. Pistion
6.4.3.2
强压油缸使用调整方法：
Forced cylinder use and adjustment method:
（ 1 ）强压油缸简图：
Forced cylinder diagram:
（
2
）调整方法：
Adjustment
转运状态的调整：为保证农具在运输时安全可靠，当农具上升至最高点应调节定位卡箍把定位调节阀
8
压到底，通过定位阀，闭塞油缸下腔的油路，使之不能再下降。
Transshipment state adjustment: To ensure safe and reliable tools in the transport, up to the highest point when the
tools should be adjusted to locate positioning clamp pressure regulating valve 8 in the end, by positioning the valve,
blocking the oil cylinder lower chamber, so they can not be dropped .
4,
调整完毕，紧各处紧固件。
The adjustment is completed, tighten fasteners throughout.