Using the Scope Functions
3
Agilent U1602A/U1604A User’s and Service Guide
107
To save or recall configuration setups to/from internal memory, follow the
instructions below:
1
Press and hold
to access Save/Recall menu.
2
Press F1 to access Save/Load Setup menu.
3
Up to 10 setups can be stored over four pages of menu. Press the
respective softkey to save or load setups to/from internal memory.
4
In Figure 3- 39, press F1 to save the configuration setup into Setup 1.
5
Press the F1 again to load the Setup 1 from the internal memory, refer
to Figure 3- 40.
6
Go through the same save and recall setup steps for saving and
recalling the subsequent setups.
Figure 3-40
The <Save> display indicates no setup file is being saved. You can press F1 to
save the setup into Setup 1.
