Agilent Technologies N4962A Скачать руководство пользователя страница 4

Страница: 4 / 88

Symbols on Instruments

Indicates warning or caution. If you see this

symbol on a product, you must refer to the

manuals for specific Warning or Caution

information to avoid personal injury or damage to

the product.

C-Tick Conformity Mark of the Australian ACA for

EMC compliance.

Indicates that protective earthing ground is

incorporated in the power cord.

This symbol indicates that internal circuits can be

damaged by electrostatic discharge (ESD),

therefore, avoid applying static discharges to the

panel input connectors.

This mark indicates compliance with the Canadian

EMC regulations.

ISM 1-A

This text denotes the instrument is an Industrial

Scientific and Medical Group 1 Class A product.

CE Marking to state compliance within the

European Community: This product is in

conformity with the relevant European Directives:

EMC Directive 2004/108/EC and Low Voltage

Directive 2006/95/EC.

China RoHS regulations include requirements

related to packaging, and require compliance to

China standard GB18455-2001. This symbol

indicates compliance with the China RoHS

regulations for paper/fiberboard packaging.

Indicates the time period during which no

hazardous or toxic substance elements are

expected to leak or deteriorate during normal use.

Forty years is the expected useful life of the

product.

The Korean Certification (KC) mark is required for

products that are subject to legally compulsory

certification.
The KC mark includes the marking’s identifier

code that has up to 26 digits and follows this

format: KCC-VWX-YYY-ZZZZZZZZZZZZZ.

This symbol indicates that the instrument requires

alternating current (AC) input.

This symbol indicates that the power line switch

is in the ON position.

This symbol indicates that the power line switch

is in the OFF position.

Содержание N4962A

























































































Результаты поиска

Содержание N4962A

Отзывы:

Бренды по названию

Популярные бренды

Agilent Technologies N4962A, Руководство пользователя

Результаты поиска

Содержание N4962A

Отзывы:

Бренды по названию

Популярные бренды